Adding Maintenance to your project

Adding Maintenance Savings is all done through the audit section of Retrolux. You will set the maintenance cost on a per fixture basis.

1. Open up the audit section of the software.
2. Select the inventory tab and go into "Product Schedules"
3. From here, select "Edit" on the fixture you would like to add maintenance costs to.
4. Select the additional tab at the top and scroll down to the bottom.
5. Add Maintence by inputting values within the "Replacement Cost", "Installation Time" or "Annual Maintenance" fields.
6. The software will calculate maintenance on a PER FIXTURE basis.
7. Select save and move forward.

Note: You are not limited to using one type of maintenance field. You can use multiple fields to reach your end maintenance cost.